Skip to main content

Compactor Receiver Box Roll-Off

Compactor Receiver Boxes for Compacted Waste Collection

Box Gang’s compactor receiver box roll-offs, also known as Octagon containers, receive and transport material from compatible compaction equipment. A one-piece steel floor, gusseted crossmembers, and multiple duty configurations provide construction options for your operation. Reinforced models with belly bands are available for compactors and precrushers with high force ratings.

The Box Gang Advantage

Heavy-Duty Uprights & Nose Rollers
Heavy-Duty Uprights & Nose Rollers

Heavy-duty uprights with wear plates and a solid steel bullnose reinforce the container’s front end. The 4-inch × 6-inch nose rollers support smooth pickup and drop-off with compatible hoists.

Vertical Lift Latch
Vertical Lift Latch

The vertical lift latch secures the rear door during transport and allows it to be released for unloading.

Heavy-Duty Hinges, Door & Rollers
Heavy-Duty Hinges, Door & Rollers

A heavy-duty latch assembly, greasable hinges, and ground rollers support repeated handling. The door-over-floor design adds strength, protects the hinges, and helps prevent door sagging.

Reinforcement for High-Force Equipment
Reinforcement for High-Force Equipment

Optional vertical side supports and belly bands provide additional reinforcement for high-force compactor applications. Heavy Duty and Extra Heavy Duty configurations include three belly bands. Our sales team can help confirm the appropriate configuration for your compactor or precrusher.

Options

Container Dogs
Container Dogs
Belly Bands
Belly Bands
Gasketed Door
Gasketed Door
Round Auger Opening
Round Auger Opening

Compactor Receiver Box Roll-Off Specs

Standard Features

  • One-piece 3/16-inch floor.
  • 6 × 2 × 3/16-inch long sills.
  • 3-inch channel crossmembers.
  • Crossmembers on 18-inch centers.
  • Every crossmember gusseted.
  • Solid steel bullnose.
  • Structural channel rub rails.
  • 8 × 8-inch greasable front and rear ground rollers.
  • Standard cable outside rail.
  • Primed inside and outside.
  • Enamel-based exterior paint in any color.

Optional Features

  • Heavier 1/4-inch main rails.
  • Vertical side supports and belly bands for high-force compactors.
  • Gasketed tailgate.
  • Dust collection box ports.

Duty Configurations

Configuration Floor Sides & Door Main Rails
Standard 3/16 inch 12 gauge 3/16 inch
Light Duty 10 gauge 12 gauge 3/16 inch
Heavy Duty 1/4 inch 10 gauge 1/4 inch
Extra Heavy Duty 1/4 inch 7 gauge 3/8 inch

Available Sizes & Styles

Model # Rated Cubic Yards Floor Sides Roof Inside Dimensions
A – Length B – Height Width
ROL-OPB2290-10 40 3/16″ one-piece 10 ga 10 ga 22′ 88″ 89″
ROL-OPB2290-7-10 40 3/16″ one-piece 7 ga lower, 10 ga upper 10 ga 22′ 88″ 89″
ROL-OPB2290-7 40 3/16″ one-piece 7 ga 10 ga 22′ 88″ 89″
ROL-RPB2290 42 3/16″ one-piece 10 ga, 10 ga side posts 10 ga 22′ 88″ 89″

Disclaimer:
All dimensions and specifications are nominal and subject to change.

Standard Color Options

Beige
Beige
Light Gray
Light Gray
Medium Gray
Medium Gray
Dark Gray
Dark Gray
Lime Green
Lime Green
Forest Green
Forest Green
Dark Green
Dark Green
Dark Brown
Dark Brown
Yellow
Yellow
Orange
Orange
Red
Red
Maroon
Maroon
Box Gang Blue
Box Gang Blue
Medium Blue
Medium Blue
Dark Blue
Dark Blue
Black
Black

Frequently Asked Questions About Compactor Receiver Box Roll-Offs

Have questions about matching a receiver box to your compaction equipment? Find answers below, or contact our sales team for help with dimensions, duty configurations, and available options.

Octagon is the style name used for this Box Gang compactor receiver box. When requesting a quote, you can refer to it as an Octagon container or a compactor receiver box roll-off.

Compatibility depends on the compactor’s connection requirements, receiver opening, force rating, and the container configuration. Provide your equipment make, model, and specifications so our sales team can help confirm the appropriate fit.

Yes. Reinforced configurations with belly bands are available for equipment with high force ratings. The listed Heavy Duty and Extra Heavy Duty configurations each include three belly bands. Our sales team can help determine which configuration suits your equipment.

Yes. Other dimensions and sizes are available upon request. Options include heavier main rails, vertical side supports and belly bands, gasketed tailgates, and dust collection box ports.

Let’s Find the Right Receiver Box for Your Equipment

Tell us about your compactor or precrusher, the materials you handle, your hauling equipment, and the quantity you need. Our sales team can help you select an Octagon receiver box with the appropriate dimensions, duty configuration, and options.

Request a Quote